L-511 High-Precision Linear Stage

High Travel Accuracy

Travel ranges from 52 to 155 mm (2" to 6")
Repeatability to 0.1 µm
Active Drive DC, BLDC, and DC gear motor
Stepper motor
Optional: Linear encoder for direct position measuring
Direction-sensing reference switch

The L-511 with linear encoder reliably performs repeatable 20-nm steps.

Direction of the axes and torques for linear stages

L-511.0xx111, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

L-511.0xx132, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

L-511.x0DG10, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

L-511.xxADx0, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

L-511.xxSD00, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

L-511 and L-509 precision stages can be combined without adapter plate for multi-axis positioning

Multi-axis setup with L-511 (horizontal) and L-509 (vertical) precision stages

Reference-class linear stage

High travel accuracy and load capacity thanks to recirculating ball bearing guides. Precision ball screw with 2 mm pitch. Stress-relieved aluminum base for high stability. Noncontact optical limit switches. Noncontact optical reference switch with direction sensing in the middle of the travel range.

Motor types available

ActiveDrive DC motor for high velocity: Control via pulse-width-modulated (PWM) signals, the operating voltage is achieved via an amplifier integrated in the motor housing
DC servo motor with gearhead for high torques and resolution at low motor power
Brushless DC motor: For applications with a high duty cycle. Use a controller with sine commutation for an exceptionally smooth synchronous motion and low vibrations even at a very low velocity.
2-phase stepper motor for low velocity and high resolution

Types of position measuring

Without encoder (open loop)
Integrated rotary encoder on the motor shaft
Incremental linear encoder

Highly accurate position measuring with incremental linear encoder

Noncontact optical linear encoders measure the position directly at the platform with the greatest accuracy. Nonlinearity, mechanical play or elastic deformation have no influence on the measurement.

Application fields

Autofocus. Laser cutting. Research. Biotechnology. Automation. Optical alignment.

データシートのダウンロード画面へ仕様へ

データシート

日付 / バージョン

2022-11-14

pdf - 6 MB

日付 / バージョン

2022-11-14

pdf - 6 MB

日付 / バージョン

2018-11-27

pdf - 2 MB

ダウンロード

Select a travel range:

Click inside the table and use your arrow keys to scroll left or right.

Motion	L-511.033111	L-511.033132	L-511.035111	L-511.035132	L-511.053111	L-511.053132	L-511.055111	L-511.055132	L-511.073111	L-511.073132	L-511.075111	L-511.075132	L-511.20AD10	L-511.20DG10	L-511.20SD00	L-511.24AD00	L-511.2ASD00	L-511.40AD10	L-511.40DG10	L-511.40SD00	L-511.44AD00	L-511.4ASD00	L-511.60AD10	L-511.60DG10	L-511.60SD00	L-511.64AD00	L-511.6ASD00	Tolerance
Active axes	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X	X
Travel range in X	52 mm	52 mm	52 mm	52 mm	102 mm	102 mm	102 mm	102 mm	155 mm	155 mm	155 mm	155 mm	52 mm	52 mm	52 mm	52 mm	52 mm	102 mm	102 mm	102 mm	102 mm	102 mm	155 mm	155 mm	155 mm	155 mm	155 mm
Maximum velocity in X, unloaded	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	90 mm/s	6 mm/s	45 mm/s	90 mm/s	45 mm/s	90 mm/s	6 mm/s	45 mm/s	90 mm/s	45 mm/s	90 mm/s	6 mm/s	45 mm/s	90 mm/s	45 mm/s
Straightness (Linear crosstalk in Y with motion in X)	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 3 µm	± 3 µm	± 3 µm	± 3 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 3 µm	± 3 µm	± 3 µm	± 3 µm	± 3 µm	typ.
Flatness (Linear crosstalk in Z with motion in X)	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 3 µm	± 3 µm	± 3 µm	± 3 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 1.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 2.5 µm	± 3 µm	± 3 µm	± 3 µm	± 3 µm	± 3 µm	typ.
Pitch (Rotational crosstalk in θY with motion in X)	± 40 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 70 µrad	typ.
Yaw (Rotational crosstalk in θZ with motion in X)	± 40 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 40 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 60 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 70 µrad	± 70 µrad	typ.
Positioning	L-511.033111	L-511.033132	L-511.035111	L-511.035132	L-511.053111	L-511.053132	L-511.055111	L-511.055132	L-511.073111	L-511.073132	L-511.075111	L-511.075132	L-511.20AD10	L-511.20DG10	L-511.20SD00	L-511.24AD00	L-511.2ASD00	L-511.40AD10	L-511.40DG10	L-511.40SD00	L-511.44AD00	L-511.4ASD00	L-511.60AD10	L-511.60DG10	L-511.60SD00	L-511.64AD00	L-511.6ASD00	Tolerance
Integrated sensor	Incremental linear encoder	Incremental rotary encoder	Incremental linear encoder	Incremental rotary encoder	Incremental linear encoder	Incremental rotary encoder	Incremental linear encoder	Incremental rotary encoder	Incremental linear encoder	Incremental rotary encoder	Incremental linear encoder	Incremental rotary encoder	Incremental rotary encoder	Incremental rotary encoder		Incremental linear encoder	Incremental linear encoder	Incremental rotary encoder	Incremental rotary encoder		Incremental linear encoder	Incremental linear encoder	Incremental rotary encoder	Incremental rotary encoder		Incremental linear encoder	Incremental linear encoder
Unidirectional repeatability in X	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.488 µm	0.2 µm	0.2 µm	0.1 µm	0.1 µm	0.488 µm	0.2 µm	0.2 µm	0.1 µm	0.1 µm	0.488 µm	0.2 µm	0.2 µm	0.1 µm	0.1 µm	typ.
Bidirectional repeatability in X	± 0.1 µm	± 1.25 µm	± 0.1 µm	± 1.25 µm	± 0.1 µm	± 1.25 µm	± 0.1 µm	± 1.25 µm	± 0.1 µm	± 1.25 µm	± 0.1 µm	± 1.25 µm	± 1.25 µm	± 2 µm	± 2 µm	± 0.2 µm	± 0.2 µm	± 1.25 µm	± 2 µm	± 2 µm	± 0.2 µm	± 0.2 µm	± 1.25 µm	± 2 µm	± 2 µm	± 0.2 µm	± 0.2 µm	typ.
Minimum incremental motion in X	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.1 µm	0.2 µm	0.488 µm	0.1 µm	0.2 µm	0.1 µm	0.02 µm	0.488 µm	0.1 µm	0.2 µm	0.1 µm	0.02 µm	0.488 µm	0.1 µm	0.2 µm	0.1 µm	0.02 µm	typ.
Sensor signal	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	A/B quadrature, RS-422	A/B quadrature, RS-422		A/B quadrature, RS-422	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	A/B quadrature, RS-422		A/B quadrature, RS-422	Sin/cos, 1 V peak-peak	A/B quadrature, RS-422	A/B quadrature, RS-422		A/B quadrature, RS-422	Sin/cos, 1 V peak-peak
Reference switch	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical
Limit switches	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical	Optical
Sensor resolution		20000 Cts./rev.		20000 Cts./rev.		20000 Cts./rev.		20000 Cts./rev.		20000 Cts./rev.		20000 Cts./rev.	16384 Cts./rev.	4096 Cts./rev.				16384 Cts./rev.	4096 Cts./rev.				16384 Cts./rev.	4096 Cts./rev.
Sensor signal period			20 µm				20 µm				20 µm
Motor encoder			Incremental rotary encoder	Incremental rotary encoder			Incremental rotary encoder	Incremental rotary encoder			Incremental rotary encoder	Incremental rotary encoder
Resolution, motor encoder			20000 Cts./rev.	20000 Cts./rev.			20000 Cts./rev.	20000 Cts./rev.			20000 Cts./rev.	20000 Cts./rev.
Motor encoder: Sensor signal			A/B quadrature, RS-422				A/B quadrature, RS-422				A/B quadrature, RS-422
Backlash in X															1 µm					1 µm					1 µm			typ.
Sensor resolution																50 nm	5 nm				50 nm	5 nm				50 nm	5 nm
Drive Properties	L-511.033111	L-511.033132	L-511.035111	L-511.035132	L-511.053111	L-511.053132	L-511.055111	L-511.055132	L-511.073111	L-511.073132	L-511.075111	L-511.075132	L-511.20AD10	L-511.20DG10	L-511.20SD00	L-511.24AD00	L-511.2ASD00	L-511.40AD10	L-511.40DG10	L-511.40SD00	L-511.44AD00	L-511.4ASD00	L-511.60AD10	L-511.60DG10	L-511.60SD00	L-511.64AD00	L-511.6ASD00	Tolerance
Drive type	DC motor	DC motor	Brushless DC motor	Brushless DC motor	DC motor	DC motor	Brushless DC motor	Brushless DC motor	DC motor	DC motor	Brushless DC motor	Brushless DC motor	DC motor with ActiveDrive	DC gear motor	2-phase stepper motor	DC motor with ActiveDrive	2-phase stepper motor	DC motor with ActiveDrive	DC gear motor	2-phase stepper motor	DC motor with ActiveDrive	2-phase stepper motor	DC motor with ActiveDrive	DC gear motor	2-phase stepper motor	DC motor with ActiveDrive	2-phase stepper motor
Nominal voltage	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V	24 V
Peak voltage	48 V	48 V	48 V	48 V	48 V	48 V	48 V	48 V	48 V	48 V	48 V	48 V	24 V	48 V	48 V	24 V	48 V	24 V	48 V	48 V	24 V	48 V	24 V	48 V	48 V	24 V	48 V
Drive force in negative direction of motion in X	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	typ.
Drive force in positive direction of motion in X	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	100 N	typ.
Nominal current, RMS			2.42 A	2.42 A			2.42 A	2.42 A			2.42 A	2.42 A																typ.
Torque constant			0.031 N·m/A	0.031 N·m/A			0.031 N·m/A	0.031 N·m/A			0.031 N·m/A	0.031 N·m/A																typ.
Resistance phase-phase			0.81 Ω	0.81 Ω			0.81 Ω	0.81 Ω			0.81 Ω	0.81 Ω	1.63 Ω	4.09 Ω	3.3 Ω	1.63 Ω	3.3 Ω	1.63 Ω	4.09 Ω	3.3 Ω	1.63 Ω	3.3 Ω	1.63 Ω	4.09 Ω	3.3 Ω	1.63 Ω	3.3 Ω	typ.
Inductance phase-phase			0.64 mH	0.64 mH			0.64 mH	0.64 mH			0.64 mH	0.64 mH	0.27 mH	0.18 mH	2.8 mH	0.27 mH	2.8 mH	0.27 mH	0.18 mH	2.8 mH	0.27 mH	2.8 mH	0.27 mH	0.18 mH	2.8 mH	0.27 mH	2.8 mH
Back EMF, phase-phase, rotational			3.3 V/kRPM	3.3 V/kRPM			3.3 V/kRPM	3.3 V/kRPM			3.3 V/kRPM	3.3 V/kRPM	3.95 V/kRPM	1.68 V/kRPM		3.95 V/kRPM		3.95 V/kRPM	1.68 V/kRPM		3.95 V/kRPM		3.95 V/kRPM	1.68 V/kRPM		3.95 V/kRPM		max.
Number of pole pairs			7	7			7	7			7	7
Back EMK, rotational														1.68 V/kRPM					1.68 V/kRPM					1.68 V/kRPM				max.
Motor resolution															200 Full steps/rev.					200 Full steps/rev.					200 Full steps/rev.
Mechanical Properties	L-511.033111	L-511.033132	L-511.035111	L-511.035132	L-511.053111	L-511.053132	L-511.055111	L-511.055132	L-511.073111	L-511.073132	L-511.075111	L-511.075132	L-511.20AD10	L-511.20DG10	L-511.20SD00	L-511.24AD00	L-511.2ASD00	L-511.40AD10	L-511.40DG10	L-511.40SD00	L-511.44AD00	L-511.4ASD00	L-511.60AD10	L-511.60DG10	L-511.60SD00	L-511.64AD00	L-511.6ASD00	Tolerance
Guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide	Recirculating ball bearing guide
Drive screw type	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw	Ball screw
Drive screw pitch	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm	2 mm
Moved mass in X, unloaded	600 g	600 g	600 g	600 g	600 g	600 g	600 g	600 g	650 g	650 g	650 g	650 g	600 g	600 g	600 g	600 g	600 g	600 g	600 g	600 g	600 g	600 g	650 g	650 g	650 g	650 g	650 g
Permissible push force in Y	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	max.
Permissible push force in Z	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	500 N	max.
Permissible pull force in Y	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	250 N	max.
Permissible torque in θx	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	60 N·m	max.
Permissible torque in θY	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	max.
Permissible torque in θZ	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	30 N·m	60 N·m	30 N·m	30 N·m	60 N·m	30 N·m	60 N·m	30 N·m	30 N·m	60 N·m	30 N·m	60 N·m	30 N·m	30 N·m	60 N·m	30 N·m	max.
Overall mass	2500 g	2500 g	2400 g	2400 g	2600 g	2600 g	2700 g	2700 g	3100 g	3100 g	3000 g	3000 g	2500 g	2500 g	2400 g	2500 g	2400 g	2800 g	2700 g	2600 g	2700 g	2600 g	3300 g	2900 g	3100 g	3500 g	3100 g
Material	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, stainless steel	Aluminum, steel	Aluminum, steel	Aluminum, stainless steel	Aluminum, steel	Aluminum, stainless steel	Aluminum, steel	Aluminum, steel	Aluminum, stainless steel	Aluminum, steel	Aluminum, stainless steel	Aluminum, steel	Aluminum, steel	Aluminum, stainless steel	Aluminum, steel
Gear ratio i			1	1			1	1			1	1		29,642					29,642					29,642
Permissible push force in X			500 N	500 N			500 N	500 N			500 N	500 N		500 N					500 N					500 N				max.
Holding force in X, passive														50 N	50 N		50 N		50 N	50 N		50 N		50 N	50 N		50 N
Miscellaneous	L-511.033111	L-511.033132	L-511.035111	L-511.035132	L-511.053111	L-511.053132	L-511.055111	L-511.055132	L-511.073111	L-511.073132	L-511.075111	L-511.075132	L-511.20AD10	L-511.20DG10	L-511.20SD00	L-511.24AD00	L-511.2ASD00	L-511.40AD10	L-511.40DG10	L-511.40SD00	L-511.44AD00	L-511.4ASD00	L-511.60AD10	L-511.60DG10	L-511.60SD00	L-511.64AD00	L-511.6ASD00	Tolerance
Connector	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	D-sub 15-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	D-sub 15-pin (m)	HD D-sub 26-pin (m)	D-sub 15-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	D-sub 15-pin (m)	HD D-sub 26-pin (m)	D-sub 15-pin (m)	HD D-sub 26-pin (m)	HD D-sub 26-pin (m)	D-sub 15-pin (m)	HD D-sub 26-pin (m)
Sensor connector	D-sub 9-pin (m)		D-sub 9-pin (m)		D-sub 9-pin (m)		D-sub 9-pin (m)		D-sub 9-pin (m)		D-sub 9-pin (m)						D-sub 9-pin (m)					D-sub 9-pin (m)					D-sub 9-pin (m)
Operating temperature range	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C	5 to 40 °C
Recommended controllers / drivers	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	ACS modular controller	C-891 C-885 with C-891.10C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	ACS modular controller	C-891 C-885 with C-891.10C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	ACS modular controller	C-891 C-885 with C-891.10C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	C-663.12 C-885 with C-663.12C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884	C-663.12 C-885 with C-663.12C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	C-663.12 C-885 with C-663.12C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884	C-663.12 C-885 with C-663.12C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884	C-863 C-885 with C-863.20C885 C-884 ACS modular controller	C-663.12 C-885 with C-663.12C885 ACS modular controller	C-863 C-885 with C-863.20C885 C-884	C-663.12 C-885 with C-663.12C885 ACS modular controller

データシートのダウンロード画面へダウンロード画面へ

製品についての注意事項

日付 / バージョン

2021-04-19

pdf - 917 KB

英語

ダウンロード

データシート

日付 / バージョン

2022-11-14

pdf - 6 MB

日付 / バージョン

2022-11-14

pdf - 6 MB

日付 / バージョン

2018-11-27

pdf - 2 MB

ダウンロード

ドキュメント

L-511 High-Precision Linear Stage

日付 / バージョン

1.7.0 2022-11-14

pdf - 3 MB

日付 / バージョン

1.7.0 2022-11-14

pdf - 3 MB

ドキュメント

Positioners with Electric Motors: DT-xx / HPS-170 / L-xxx / LS-xxx / PRS-xxx / RS-40 / UPL-120 / VT-80 / WT-xx / WT-xxx

日付 / バージョン

3.0.0 2024-01-15

pdf - 261 KB

日付 / バージョン

3.0.0 2024-01-15

pdf - 295 KB

ダウンロード

３D モデル

L-511.xxADx0 3D Model

zip - 15 MB

３D モデル

L-511.x0DG10 3D Model

zip - 6 MB

３D モデル

L-511.0xx111 3D Model

zip - 13 MB

３D モデル

L-511.0xx132 3D Model

zip - 9 MB

３D モデル

L-511.xxSD00 3D Model

zip - 12 MB

見積/発注へ

Ask for a free quote on quantities required, prices, and lead times or describe your desired modification.

L-511.033111

High-precision linear stage; DC motor; 52 mm travel range; 500 N load capacity; 90 mm/s maximum velocity; ball screw; incremental linear encoder, sin/cos, 1 V peak-peak

Specifications

Datasheet L-511

Specifications

Downloads

製品についての注意事項

Product Change Notification Motor Driven Products

データシート

Datasheet L-511

ドキュメント

User Manual MP140 (英語)

Short Instructions MP146EK

３D モデル

3-D model L-511.xxADx0

3-D model L-511.x0DG10

3-D model L-511.0xx111

3-D model L-511.0xx132

3-D model-L-511.xxSD00

Quote / Order

お問い合わせ