H-820.D2
Hexapod microrobot, basic model, 20 mm/s, 20 kg load, D-sub connector. Connecting cables are not included in the scope of delivery and must be ordered separately.
H-820 6-Axis Hexapod
Cost-Effective Hexapod
- Six degrees of freedom, travel ranges to 100 mm / 60°
- Load capacity up to 20 kg
- Velocity when fully loaded to 20 mm/s
- Repeatability to ±0.5 µm
- Works in any orientation
- Fast response behavior
Maximum loads on the H-820.D2 when mounted horizontally
Maximum loads on the H-820.D2 when mounted at the most unfavorable angle
Maximum loads on the H-820.D2 when mounted vertically
Maximum permissible force acting on the H-820.D2 when mounted horizontally
H-820.D2, dimensions in mm, at zero position of nominal travel range
H-820 6-Axis Hexapod
製品の解説
仕様
ダウンロード
見積 / 発注
Standard-class 6-axis positioning system
Parallel-kinematic design for six degrees of freedom, making it significantly more compact and stiff than serial-kinematic systems, higher dynamics, no moved cables: Higher reliability, reduced friction.
Direct drive with brushless DC motors (BLDC)
Indirect measuring principle
Rotary encoder on motor shaft
PIVirtualMove
The simulation software simulates the limits of the workspace and load capacity of a hexapod. Therefore, even before purchasing, you can check whether a particular hexapod model can handle the loads, forces, and torques occurring in an application. For this purpose, the simulation tool takes the position and motion of the hexapod as well as the pivot point and several reference coordinate systems into account.
Application fields
Industry and research. For life science, biotechnology, automation, micromachining
Specifications
Specifications
Select a travel range:
Click inside the table and use your arrow keys to scroll left or right.
| Motion | H-820.D2 | Tolerance |
|---|---|---|
| Active axes | X ǀ Y ǀ Z ǀ θX ǀ θY ǀ θZ | |
| Travel range in X | ± 50 mm | |
| Travel range in Y | ± 50 mm | |
| Travel range in Z | ± 25 mm | |
| Rotation range in θX | ± 15 ° | |
| Rotation range in θY | ± 15 ° | |
| Rotation range in θZ | ± 30 ° | |
| Maximum velocity in X | 20 mm/s | |
| Maximum velocity in Y | 20 mm/s | |
| Maximum velocity in Z | 20 mm/s | |
| Maximum angular velocity in θX | 200 mrad/s | |
| Maximum angular velocity in θY | 200 mrad/s | |
| Maximum angular velocity in θZ | 200 mrad/s | |
| Typical velocity in X | 2 mm/s | |
| Typical velocity in Y | 2 mm/s | |
| Typical velocity in Z | 2 mm/s | |
| Typical angular velocity in θX | 20 mrad/s | |
| Typical angular velocity in θY | 20 mrad/s | |
| Typical angular velocity in θZ | 20 mrad/s | |
| Positioning | H-820.D2 | Tolerance |
| Minimum incremental motion in X | 5 µm | typ. |
| Minimum incremental motion in Y | 5 µm | typ. |
| Minimum incremental motion in Z | 5 µm | typ. |
| Minimum incremental motion in θX | 12.5 µrad | typ. |
| Minimum incremental motion in θY | 12.5 µrad | typ. |
| Minimum incremental motion in θZ | 12.5 µrad | typ. |
| Unidirectional repeatability in X | ± 1.5 µm | typ. |
| Unidirectional repeatability in Y | ± 1.5 µm | typ. |
| Unidirectional repeatability in Z | ± 0.5 µm | typ. |
| Unidirectional repeatability in θX | ± 8 µrad | typ. |
| Unidirectional repeatability in θY | ± 8 µrad | typ. |
| Unidirectional repeatability in θZ | ± 25 µrad | typ. |
| Backlash in X | 30 µm | typ. |
| Backlash in Y | 30 µm | typ. |
| Backlash in Z | 3 µm | typ. |
| Backlash in θX | 30 µrad | typ. |
| Backlash in θY | 30 µrad | typ. |
| Backlash in θZ | 300 µrad | typ. |
| Integrated sensor | Incremental rotary encoder | |
| Drive Properties | H-820.D2 | Tolerance |
| Drive type | Brushless DC motor | |
| Nominal voltage | 24 V | |
| Mechanical Properties | H-820.D2 | Tolerance |
| Maximum load capacity, base plate in any orientation | 10 kg | |
| Maximum load capacity, base plate horizontal | 20 kg | |
| Maximum holding force, base plate in any orientation | 5 N | |
| Maximum holding force, base plate horizontal | 200 N | |
| Overall mass | 15 kg | |
| Material | Aluminum | |
| Miscellaneous | H-820.D2 | Tolerance |
| Operating temperature range | 0 to 50 °C | |
| Connector for data transmission | HD D-sub 78 (m) | |
| Connector for supply voltage | M12 4-pole (m) | |
| Recommended controllers / drivers | C-887.5x |
Technical data specified at 22±3 °C.
The maximum travel ranges of the individual coordinates (X, Y, Z, θX, θY, θZ) are interdependent. The data for each axis shows its maximum travel range when all other axes are in the zero position of the nominal travel range and the default coordinate system is in use, or rather when the pivot point is set to 0,0,0.
Connecting cables are not included in the scope of delivery and must be ordered separately.
Ask about customized versions.
Downloads
製品についての注意事項
データシート
ドキュメント
ドキュメント
User Manual MS207 (英語)
H-820 Hexapod Microrobot
日付 / バージョン
1.4.0 2023-01-12
pdf - 2 MB
日付 / バージョン
1.4.0 2023-01-12
pdf - 2 MB
３D モデル
３D モデル
H-820.D2 3-D model
日付 / バージョン
2020-11-24
zip - 831 KB
ソフトウェア ファイル
ソフトウェア ファイル
PIVirtualMove
日付 / バージョン
1.0.1.0, 2024-01
zip - 150 MB
Ask for a free quote on quantities required, prices, and lead times or describe your desired modification.
