N-422 Linear Actuator with Piezo Motor

Inexpensive and Easy to Integrate

Easy integration: Two mounting versions
Silent: Operating frequency to >20 kHz
Velocity over 5 mm/s
Submicron resolution
Holding force to 10 N

見積 / 発注

N-422, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

Piezo motor direct drive

OEM actuator without position sensor. Continuous motion with step frequencies in the ultrasound range. Mounting via thread on the front or on a level surface perpendicular to the direction of motion.

Inertia drive

Self-locking, no heat generation at rest. Noiseless drive with operating frequencies over 20 kHz. Resolution in step mode approx. 300 nm, open loop.

Application fields

Industry and research. Alignment of optical elements, micromanipulation, biotechnology, cell manipulation, medical technology.

データシートのダウンロード画面へ仕様へ見積 / 発注

データシート

日付 / バージョン

2023-03-07

pdf - 475 KB

日付 / バージョン

2023-03-07

pdf - 479 KB

ダウンロード

Motion	N-422.50	Tolerance
Active axes	X
Travel range in X	35 mm
Maximum velocity in X, unloaded	5 mm/s	min.
Maximum step frequency	20 kHz	max.
Step size in full step mode	300 nm	typ.
Drive Properties	N-422.50	Tolerance
Operating voltage	48	max.
Drive type	Piezoelectric inertia drive
Maximum power consumption	15 (actuator), 30 (driver input) W	nominal
Drive force in X	7 N	max.
Mechanical Properties	N-422.50	Tolerance
Stiffness in X	> 4 N/µm	±20 %
Holding force in X, passive	10 N	min.
Overall mass	25 g	±5 %
Material	Stainless steel; ceramic (runner)
Miscellaneous	N-422.50	Tolerance
Operating temperature range	0 to 50 °C
Connector	LEMO FFA.0S.303.CLAC27
Cable length	2 m	+30 / -0 mm
Recommended controllers / drivers	E-872.401